FLO Spin-On Oil Filter for Ducati (#PCS5)

Description

Ducati Applications

Features

• Gunmetal-grey Anodized Finish

• Cleanable and Reusable

• Superior Filtration: 35 microns “absolute rating” (one-pass test). This is far superior to lower micron multiple-pass rated paper filters. (Please Google research if you don’t understand why this is better.)

• Proven Aerospace, NASCAR, Indy, and Formula 1 Technology

• High Flow Rate

• Easy Filter Element Inspection

• Unaffected by Water, Heat, or Pressure

• Environmentally Friendly

• Pays for Itself: Save money over time by not needing to replace filters.

Superior Filtration Technology

This should be the last oil filter you will ever need to buy! Constructed from laser-cut, medical-grade 304 stainless steel micronic filter cloth, this filter provides up to 200% more filter area in many cases. It captures particles down to 35 microns (absolute rating, one-pass test), which is about three times better than most good paper or brass filters.

Unlike glued paper filters, the FLO Oil Filter’s pleat seam is welded, allowing it to withstand temperatures up to 600°F.

Consistent Flow Under All Conditions

This filter ensures consistent flow under extreme conditions, including high heat, water, and cold starts. Paper filters often struggle in these conditions, causing the bypass valve to open and allowing unfiltered oil to enter the engine. The FLO Oil Filter prevents this, providing superior engine protection no matter the circumstances.

This advanced technology is widely used in NASCAR, Indy-type cars, Formula 1, and the aerospace industry where filtration is critical to performance.

Environmental Benefits

In addition to its performance benefits, the FLO Oil Filter helps keep old used filters out of landfills, making it an environmentally friendly choice.

Cleaning Instructions

1. Note the original filter position to ensure correct installation.

2. Clean the filter at each oil change with solvent, contact cleaner, kerosene, or any other degreasing agent—even common dish soap.

3. Blow air through the filter from the inside out to remove any small particles or cleaning agents.

4. Lubricate rubber parts with clean oil before installation to ensure a proper seal.